Cast iron truck brake shoe OEM 44060-90326 for Nissan Oil Truck. 8.5 inch width, 30 holes, 10.0 kg per shoe. In stock, wooden case packing, samples available.
PAGE CONTENT
HEAVY DUTY CAST IRON BRAKE SHOE FOR NISSAN OIL TRUCK – OEM 44060-90326 (8.5 INCH, 30 HOLES, 10.0 KG)
This 8.5 inch cast iron brake shoe, OEM number 44060-90326, also written 4406090326, is a production line replacement for the oil brake system of Nissan Oil Truck models. It delivers what fleet managers and workshop owners in demanding markets ask for first: a shoe that bolts on without surprises, holds its geometry through a full service interval and keeps stopping performance predictable under constant load. With a 30 hole lining pattern and a 10.0 kg casting weight, every shoe leaves the factory verified against the original Nissan dimensions and ships from ready stock.
THE 8.5 INCH SHOE WIDTH PUTS MORE FRICTION AREA ON THE DRUM
Width is the first number a brake specialist checks, because friction area determines how much stopping torque the shoe can generate and how long the lining lasts between overhauls. At 8.5 inches, this brake shoe spreads the lining over a wider contact band on the drum, which translates into stronger braking response for a loaded Nissan Oil Truck, lower contact pressure per square inch and slower lining wear on long downhill runs. For operators logging heavy daily mileage, the wider shoe is a direct contributor to longer brake service intervals and lower cost per kilometre.
A 30 HOLE LINING PATTERN KEEPS THE FRICTION MATERIAL LOCKED IN PLACE
The lining of a truck brake shoe carries the entire braking load, and it is only as secure as the rivets that hold it. This shoe is drilled with 30 lining holes, giving every rivet a fixed, evenly spaced position around the shoe body. The dense hole pattern prevents the friction material from shifting or peeling away under repeated hard stops, high drum temperatures and the vibration of rough roads. When the lining stays put, braking stays even, drum wear stays uniform and the shoe can be relined instead of replaced, which is a real cost advantage for workshops that rebuild brake assemblies in house.
CAST IRON CONSTRUCTION – THE RIGID CORE THAT PROTECTS YOUR BRAKE DRUM
Brake shoes for heavy Nissan trucks are manufactured in two ways: fabricated from stamped steel or cast from iron. This part is a casting, and the difference matters in daily service. A cast iron shoe holds its arc shape under pressure, so the lining keeps full contact with the drum instead of flexing into a partial contact that heats one spot and glazes the lining. The rigidity of the casting also shields the drum from uneven stress, which reduces the risk of drum scoring and cracking. At 10.0 kg, this shoe has the dense, substantial mass of a genuine OEM casting.
VERIFIED OEM REPLACEMENT FOR NISSAN OIL TRUCK – CHECK YOUR PART NUMBER BEFORE ORDERING
44060-90326 is the original Nissan part number, and this casting is produced as a dimensionally identical replacement for it. It is used on Nissan Oil Truck chassis, including the Nissan 520 series widely operated in Southeast Asia and African markets, and is commonly listed under the CW520 reference in export markets. The same NISSAN OIL family also covers 44060-90870, 44060-90201 and 44060-90278, so distributors stocking the full oil truck range can consolidate orders in one shipment. Before ordering, confirm the number and hole count stamped on the shoe currently fitted to your truck, and match it against the 30 hole, 8.5 inch specification on this page. If your vehicle carries a different part number, send it to our team and we will check availability against our brake shoe range.
Part type: brake shoe for oil operated drum brake. OEM number: 44060-90326, also stamped 4406090326. Vehicle application: Nissan Oil Truck, including Nissan 520 series. Material: cast iron. Shoe width: 8.5 inches (216 mm). Lining holes: 30. Single shoe weight: 10.0 kg. Lining: riveted friction material, fitted on request or supplied as bare casting. Packaging: export wooden case. Availability: in stock with immediate dispatch. All dimensions are checked against the original Nissan casting before each production batch is released.
WOODEN CASE EXPORT PACKING DESIGNED FOR LONG FREIGHT ROUTES
Cast iron brake shoes are heavy, and careless packing is the most common cause of damaged goods on long export routes. Each order is secured inside a wooden case, with the shoes braced so they cannot move or strike each other in transit. The case protects the machined surface from rust and impact during container loading, ocean crossing and final truck delivery. For distributors ordering multiple part numbers, we pack the goods for easy inventory counting and can combine different brake shoe references in one case to reduce freight cost.
READY STOCK WITH REGULAR SHIPMENTS TO SOUTHEAST ASIA, AFRICA AND RUSSIA
This brake shoe is held in ready stock, and our export team ships it on a regular schedule to buyers in Southeast Asia, Africa, Russia, the Middle East and Latin America. Fleet owners, brake specialists and spare parts distributors can order single sets or full container quantities, with volume pricing available for repeat orders. We provide the full export documentation needed for customs clearance, and we can advise the most suitable sea freight or air freight option for your destination port.
SAMPLES SHIP FAST – SEND YOUR DETAILS VIA WHATSAPP
Sample orders are welcome so you can inspect the casting quality, check the 30 hole pattern and test the fit before committing to a bulk purchase. To order a sample, please provide the quantity you need, the sample OEM number 44060-90326, your shipping address together with the postal code, and a WhatsApp number for contact. Our sales team will confirm the sample cost and freight charges and dispatch the parcel as soon as your order is confirmed.
auto parts, construction machinery spare parts and motorcycle parts ,including engine parts ,chassis parts ,braking systems parts, electrical parts,gearbox parts,hydraulic parts,filter system parts.
English
Russian