| VEHICLE FITMENT | |
| TYPE | welded-flat conveyor chain |
| OE NUMBER | |
| MATERIAL | Metal |
| VEHICLE FITMENT | |
| TYPE | welded-flat conveyor chain |
| OE NUMBER | |
| MATERIAL | Metal |
| SIZE | Standard size or ODM size |
| CUSTOMIZED | Yes |
| CONDITION | Brand new |
| MOQ | |
| PACKAGE | Standard or as customer requirements |
Welded-flat conveyor chains are engineered conveyor chains with welded attachment plates designed to support, push, scrape, guide, or transfer materials through industrial conveying equipment.
The supplied technical drawing shows two welded-flat conveyor chain configurations. The upper drawing presents a welded attachment arrangement with top and side views. The lower drawing presents a second attachment arrangement with multiple mounting holes and corresponding side and profile views.
The supplied table identifies two chain models:
The technical drawing and parameter table include pitch, inner-plate width, roller diameters, pin dimensions, plate dimensions, attachment dimensions, and minimum ultimate tensile strength.
All exact numerical values in this page are transcribed from the supplied image. Public sources listed at the end are used only for general welded-steel and heavy-duty conveyor-chain application background.
The chain is shown with welded flat attachment plates that can be used as carrying, pushing, scraping, or mounting surfaces within a conveyor assembly. The attachment layout should be matched to the material path and machine structure.
The supplied drawing includes an upper and a lower configuration. Their visible plate layouts, hole patterns, and dimension callouts differ. The correct configuration should be selected according to the original conveyor drawing or chain sample.
The table provides large pitch and attachment dimensions for the two listed models. These values allow equipment manufacturers and maintenance teams to compare the chain against existing sprockets, guides, shafts, and attachment supports.
The technical drawing identifies the following dimension symbols:
Welded-flat conveyor chains can be specified for conveyor layouts that require integrated attachments rather than a plain roller-chain conveying surface. Final selection depends on the conveyed material, load, speed, chain path, sprocket arrangement, and attachment support design.
The
d3 maxfield for HGH-450-S is blank in the supplied image and is intentionally shown as—here. No value has been inferred.
The source table labels the final field as
Ultimate tensile strengthwith the unitkN. This value is a tensile-strength specification, not a permissible working load. Actual working load and safety factor require a complete conveyor engineering review.
The supplied drawing has been horizontally corrected and redrawn as a separate engineering image. It retains:
English
Russian焊接板输送链welded-flat conveyor chainsWelded-Flat Conveyor Chain | HGH-300-F and HGH-450-S
The HGH-300-F model is listed with a 300.00 mm pitch and a 450.00 kN minimum ultimate tensile strength in the supplied table.
Its attachment dimensions include:
The HGH-450-S model is listed with a 450.00 mm pitch and a 650.00 kN minimum ultimate tensile strength in the supplied table.
Its attachment dimensions include:
The source table does not show a value for d3 max for HGH-450-S. This blank field should be confirmed with the technical drawing, supplier documentation, or an original chain sample before final engineering approval.
Public information about welded-steel and heavy-duty conveyor chains indicates that this chain family is commonly considered for demanding conveying environments where the chain must move bulk materials or operate with substantial abrasion, impact, or heat exposure.
Typical application areas may include:
The exact application of HGH-300-F or HGH-450-S must be confirmed against the equipment design. The public sources below describe general welded-steel chain applications and should not be interpreted as a certification or application guarantee for the models in the supplied image.
Select the required model based on the original chain, equipment drawing, and sprocket geometry:
The listed pitch values are:
Pitch must match the sprocket and the complete chain path. A chain should not be treated as interchangeable based on pitch alone.
Confirm the following dimensions before placing a replacement order:
For HGH-450-S, the d3 max field is blank in the supplied source table and requires separate confirmation.
Before selecting the chain, confirm:
The table lists minimum ultimate tensile strength values of:
These values should not be used by themselves to calculate the allowable working load. The actual working load depends on the complete mechanical system, safety factor, speed, shock loading, sprocket engagement, lubrication, and operating environment.
Technical matching can be based on:
For replacement or custom inquiries, please provide an original chain sample, a clear dimensional photograph, a sprocket drawing, or the conveyor assembly drawing.
Material grade, heat treatment, welding method, surface treatment, coating, corrosion resistance, wear life, and working-load rating are not specified in the supplied image. These details should be confirmed separately before being included in a purchase specification.
auto parts, construction machinery spare parts and motorcycle parts ,including engine parts ,chassis parts ,braking systems parts,
electrical parts,gearbox parts,hydraulic parts,filter system parts.
